Shalimar Paints

Epigard Finish Epoxy Paint

Approx Price: Rs 240 / Litre 
We are instrumental in providing our clients with quality assured Epigard Finish Paint ( Epoxy Paint) which is recommended for special use for painting fermentation floor in Tea Industry. Our offered epoxy paints forms the finish coat in heavy duty coating systems for metal and masonry surfaces for exterior and interior. The offered epoxy paints are formulated by using selected weather and chemical resistant pigments.

Features:

  • Precise composition
  • Eco-friendly
  • Corrosion resistant

 

Other Details:

 

  • A high performance, two–component Amine adduct cured epoxy glossy enamel specially formulated by using selected weather and chemical resistant pigments.
  • It forms the finish coat in heavy duty coating systems for metal and masonry surfaces for exterior and interior.
  • The coating remains unaffected by many corrosive chemicals and solvents and renders durable finish inindustrial and marine atmosphere.
  • A polyamide version is available under brand name EpigardPF Finish which is recommended for special use for painting fermentation floor in Tea Industry.

Tuffkote Etch Primer

Approx Price: Rs 250 / Litre(s) 
Etch Primer

A two pack polyvinyl butyral resin based etching primer with Zinc Tetroxy Chromate pigment foruse on non ferrous metals like aluminium and aluminium alloys, galvanised and zinc sprayedmetal, tin plate, chromium and cadmium plating, nickel etc. It is sometimes used for promotingadhesion on plastic sheets and resin laminates.

Additional Information:
  • Minimum Order Quantity: 20 Litre(s)

Bipigard CTE Black Epoxy Coal Tar

Approx Price: Rs 175 / Litre(s) 
Being a well-established organization of this industry, we are offering a premium quality Bipigard CTE Black ( Epoxy Coal Tar). Owing to its good alkali resistance Bipigard CTE XL Brown / Black can be used with cathodic protection systems. These epoxy coal tars stands corrosive conditions in soil immersion and also certain acidic and alkaline environments. In addition to this, these epoxy coal tars performs extremely well in total, partial or intermittent immersion in salt or fresh water.

Features:

  • Accurate composition
  • Precise pH value
  • Longer shelf life


Other Details:


  • A two component polyamide cured high build coal tar epoxy paint giving very good toughness andwater resistance.
  • The product performs extremely well in total, partial or intermittent immersion insalt or fresh water.
  • It stands corrosive conditions in soil immersion and also certain acidic andalkaline environments.
  • Because of its good alkali resistance Bipigard CTE XL Brown / Black canbe used with cathodic protection systems.

Epigard Zinc Phosphate Epoxy Primers

Approx Price: Rs 190 / Litre(s) 
We are remarkable entity, engaged in offering optimum quality grade of Epigard Zinc Phosphate Primer ( Epoxy Primers ). The offered epoxy primers are sternly tested on different parameters of quality so as to deliver a qualitative grade to our customers. Our provided epoxy primers are compatible with a wide range of topcoats and thus form highly efficient protective schemes for corrosive, coastal and chemical environments. These epoxy primers are available in different packaging options in order to cater client’s demands.

Features:

  • Water proof
  • Anticorrosive primer
  • Excellent adhesion


Other Details:


  • A two pack polyamide cured, epoxy anticorrosive primer containing Zinc phosphate pigment.
  • Thered version contains red oxide of iron apart from zinc phosphate.
  • The primer gives excellentadhesion to steel.
  • It is compatible with a wide range of topcoats and thus forms highly efficientprotective schemes for corrosive, coastal and chemical environments.



Additional Information:
  • Minimum Order Quantity: 20 Litre(s)

Epiplus 556 Aluminium Paint

Epiplus 556 Aluminium Paint -
A two pack polyamidoamine cured fortified epoxy high build mastic surface tolerant coatingdesigned for application on manually cleaned steel surface as well as concrete surface. Theproduct can be applied over most of the tightly adhering aged coatings and recommended asmaintenance primer with suitable top coats.

Shalithane PU Finish Polyurethane Paint

Approx Price: Rs 350 / Litre(s) 
Shalithane PU Finish Polyurethane Paint

A two pack high gloss polyurethane top coat with excellent protection properties in industrial andcoastal corrosive environment.This coating has excellent toughness and very good resistance tosplash and spillage of mild chemicals.
CONCRETE SURFACES:For new concrete surface: Ensure that thesurface is cured for minimum 2 months.Remove laitence, loose surface powder by lightsand blasting. If blast cleaning is not feasible,roughen the surface by acid etching with 10%Hydrochloric Acid solution followed by thorough freshwater hosing to remove any residual acid.The surface should be perfectly dry and cleanbefore applying appropriate primer.

Lustotherm HT 400 Heat Resisting Aluminium Temp 400'C

Approx Price: Rs 300 / Litre(s) 
A single pack high performance heat resistant aluminium paint based on silicone resin medium for protection of steel surface operating between 250o C – 400o C dry heat.

STEEL SURFACES:Degrease and blast clean to Sa 2 ½ grade minimum of Swedish specification SIS - 05 -5900 - 1967.If blast cleaning is not practical make full useof mechanical tools along with manual cleaning and wire brushing to remove loose rust / scale to St 2 or St 3 grade of Swedish specification. Surface should be perfectlyclean and dry before application of HT-400.

Lustotherm HT 600 Heat Resisting Aluminium Temp 600'c

single pack high performance heat resistant aluminium paint based on silicone resin medium for protection of steel surface operating between 400o C – 600o C dry heat.

Degrease and blast clean to Sa 2 ½ grade minimum of Swedish specification SIS - 05 -5900 - 1967. If blast cleaning is not practical make full use of mechanical tools along with manual cleaning and wire brushing to removeloose rust / scale to St 2 or St 3 grade of Swedish specification. Surface should beperfectly clean and dry before applying HT600.APPLICATION Corresponding wet DETAILS film thickness:83 - 111 microns Theoretical Spreading Rate12.0 – 9.0 Sq.metre perlitre Drying time Dust free – 4 hours Method of application:Brush / Conventional Spray Airless spray not recommended for difficulty incontrolling film thickness Thinner Thinner 6752Curing : USES Apply 1st coat. Air dry for 24 hours. Alternativelyheat cure at 200o C for 1 hour after 4 hours ofair drying. Apply 2nd coat. Allow it to dry overnight and then gradually raise the tempereture to working tempereture.Dry Heat Resistance 400o C - 600o C(Continuous)Storage life Upto 12 months so longas the material is storedin sealed container sunder standard warehouse storage conditions. Avoid exposure to heat and moisture during storage.For painting of Chimneys, Flare Stacks,Exhausts, Pipeworks, Incinerators and similar surfaces exposed to dry heat attack.

H.R. Aluminium Paint Temp. 250'C

Approx Price: Rs 195 / Litre 
A two pack general purpose Aluminum Paint having very good lustre & protective properties with heat resistance upto 250 Deg C. This is also suitable as a heat resistant coating for Chimney stacks, boiler fronts, duct work, piping and furnace structure.

The surface to be painted should be dry and free from oil, grease, dust, rust and loose matters. As heat resistant coating the paint to be applied directly on cleaned metal surface. For other uses (below 100 Deg C) the paint should go on appropriate primers (Red Oxide Metal Primer, Red Oxide Zinc Chromate Primer, Red Lead Primer or Zinc Chromate Primer Yellow).

Additional Information:
  • Minimum Order Quantity: 20 Litre

Superlac Hi-Gloss Enamel Paint

Superlac Hi -Gloss enamel is a premium multi-Purpose Enamel for interior as well exterior application. it is fast drying and gives smooth Finish with excellent gloss. It also gives excellent levelling properties with a long durable protection to subtrate. 

Ensure the surface preparation , apply a first coat of primer depending on the surface of application. Allow drying for 6-8 hours. 

Acid Alkali Resisting Bituminious Black To IS 158 Paint

Approx Price: Rs 120 / Litre(s) 
Acid Alkali Resisting Bitu Black To IS 158Finish Smooth & Semiglossy to Glossy Method of Application Brushing / Spraying Thinner MTO / White sprit Drying Time 8 hours approximately Wet Opacity 12 – 14 sqm / litre/ coat Water Content (% by mass max) 0.5Volatile Matter (% by mass max) 55Mass in Kg/10 lt of material 8.9 +- 0.01Resistance to Acid Passes the test Resistance to Alkali Passes the testF lexibility & Adhesion After 96 hours of air drying Passes the test Keeping Properties Not less than One Year Flash Point Above 30 degree centigrade Surface Preparation The surface to be free from oil ,rust grease Matters.Precautions to be observed Adequate ventilation to be provided while Painting the surfaces

Industrial Aluminium Paint

Approx Price: Rs 175 / Litre(s) 
A two pack general purpose Aluminium Paint having very good lustre &protective properties with heat resistance upto 250 Deg C. This is suitable forChimneys, Buildings, Offices, Factories, Industrial Plants, Warehouses etc. forapplication over wooden surface, steel structure e.g. grill, gates, etc

MIXING : Al. Paste & Medium supplied inproportionate quantities.HARD DRYING TIME : 12 hoursINTERVAL BEFOREOVERCOATING : 18 hour minimum.DRY FILM THICKNESS : 9 – 11 micron / coatTHEORETICALSPREADING RATE : 23 – 19 sq.m. / lt. / coat

Additional Information:
  • Minimum Order Quantity: 20 Litre(s)

Aluminium Paint IS 2339

A two pack General Purpose Aluminum Paint for protective and decorative purposes, perticularly where a heat - reflecting surface is required. the use of this material is extended to appliances connected with ammunitions.

Mixing with Aluminium Paste & medium supplied in proportionate quantities. Hard drying time 8 hours, finishing with smooth with bright metalic effects.

Epigard TL 543 HS Finish Paint

A two pack Amine-adduct cured high build phenolic epoxy tank lining specially formulated toprovide maximum chemical resistance combined with very good temperature and wear resistance.The coating has excellent resistance to crude oil, refined and unleaded petroleum products, MTBE,ATF, caustic solution, selected range of aromatic/aliphatic solvents, most commonly stored chemical products and fresh/saline/hot water. It is recommended for use on structural steel,equipment and concrete substrate exposed to severe chemical environments

Epigard HB MIO

A two pack polyamide cured high solid epoxy coating based on laminar micaceous iron oxidepigment. Designed for application on structural steel as an intermediate or finish coat exposed toaggressive coastal and industrial environment. It is ideal for application in areas where higherthickness is required for achieving optimum performance.The product acts as a tough abrasionresistant barrier coat with excellent impermeability to moisture.The grey version contains Titaniumdioxide pigment apart from MIO pigment.

Epigard Solventless Epoxy Coatings

A two pack solvent free high performance high build epoxy coating specially designed forapplication as an internal coating of both steel and concrete tanks for storage of both sweet andsour crude oils,unleaded petrol,MTBE,ATF,selected range of aliphatic and aromatic hydrocarbonsolvents and water. This product is suitable for safe storage of potable water also. It gives a verytough wear resistant, impervious coating to withstand many chemicals, fats and oils

Bipigard CTE Black

Approx Price: Rs 175 / Litre 
Bipigard CTE Black Epoxy Coal tar
A two component polyamide cured high build coal tar epoxy paint giving very good toughness andwater resistance. The product performs extremely well in total, partial or intermittent immersion insalt or fresh water. It stands corrosive conditions in soil immersion and also certain acidic andalkaline environments. Because of its good alkali resistance Bipigard CTE XL Brown / Black canbe used with cathodic protection systems

Additional Information:
  • Minimum Order Quantity: 20 Litre

Chlorokote Zinc Phosphate Primer

A chlorinated rubber based anti-corrosive primer containing zinc phosphate pigment. When topcoated with Chlorokote finish, the coating system exhibits superb water impermeability andresistance to acid fumes. An economical coating system for structural steel, equipments etc, incoastal and chemical environment. This red version contains red oxide of iron apart from zincphosphate pigment.

Heat Resisting Chimney Paint Black

A specially formulated bituminous paint with graphite black pigmentation meant for application onmetal surfaces exposed to service temperature upto 250o C. It has excellent adhesion to steel andit protects the surface from atmospheric corrosion, chemical fumes and industrial gases.

No primer is recommended. In case anyprimer is used it should be removedcompletely

Heat Resisting Zinc Dust Graphite Stack Paint

A two pack graphite pigmented heat resistant coating for protection of vessels, pipelines and hotsurfaces which are required to be insulated and stacks operating at skin temperatures of 400o Cmaximum.
Degrease and blast clean to Sa 2 ½ grademinimum of Swedish specification SIS - 05 -5900 - 1967. If blast cleaning is not practicalmake full use of mechanical tools along withmanual cleaning and wire brushing to removeloose rust / scale to St 2 or St 3 grade ofSwedish specification. Surface should beperfectly clean and dry before applying HRZinc Dust Graphite Stack Paint

Rustex No. 1 Boiler Paint

Rustex No. 1 Boiler Paint

A specially formulated graphite pigmented bituminous coating designed to prevent corrosion andpitting of ‘hot-wet’ metal surfaces in Boiler interiors, Evaporators, Tubes, Economisers, Calorifiersand similar other plants operating with hot water and steam above 100o C. The cured coating isinert and highly impervious to hot water. It renders a surface to which deposits do not easily attach,and if attached, can be easily removed thereby simplifying cleaning and descaling operations.

Red Oxide Zinc Chromate Primer

A general purpose anticorrosive primer based on phenolated alkyd medium, red oxide of Iron andZinc Chromate pigment. The primer is suitable for steel and light alloys in mild to moderatelycorrosive atmospheres. It is compatible with a wide range of top coats, e.g. synthetic enamels,bituminous paints, aluminium paints etc. The primer also conforms to IS : 2074

Tuffcote HB MIO Brown Grey

A high build anti Corrosion coating based on phenolated alkyd resin vehicle and lamellar micaceousiron oxide pigment. The paint imparts tough abrasion-resistant and durable film with excellentmoisture resistance. It is designed for use as intermediate or finish coat for protection ofstructures, equipments, above ground pipeline etc in both saline and industrial environment. It canbe top coated with conventional as well as chlorinated rubber paints.

Red Lead Primer

A quick Drying Red lead Primer based on synthetic resin medium, for use on structural Steel. It has good welting properties on steel surfaces and Exhibits excellent anticorrosive properties in both industrial & marine atmosphere. The coating is compatible with a wide range of top coats.

General Structures steel, bridges, Storage Tank extriors has holders, gas plants. water and Sewage plants.

Superlac Acrylic Emulsion

Product Information :
  • Finish:smooth with mat
  • Coverage:210 - 230 sq. Ft/ltr/coat (on suitably primed & smooth surfaces by brush application
  • Supply viscosity :13 +/- 2 poise at 30°c
  • Surface dry :within 10 min (at 30+/-1c & 65 +/- 5% r. H. )
  • Recoat time:3 hours minimum
  • Thinner:Clean tap/potable water
  • Primer :Shalimar wall neutralizing cement primer (for new plaster) shalimar water thinnable cement primer (for old painted surface)
  • Pack size :1 litre /4 litre/ 10 litre/ 20 litre
  • Area of application :Concrete, plaster, false ceiling
Looking for Shalimar Paints ?
© Ashok Paint Agencies
 
Desktop Site Back to top