To meet diverse requirements of our prestigious clients, we are engaged in providing pristine grade Jotamastic 87 Aluminum Paint. These aluminum paints are suitable for use as a dielectric shield around impressed current cathodic protection (ICCP) anodes onships. Our offered aluminum paints are tested by experts so as to dispatch a quality assured range from our end. In addition to this, these aluminum paints are available with different hardeners for varying substrate temperatures.
Gives excellent corrosion protection both in salt and fresh water
Zero side effects
Longer shelf life
A two component surface tolerant, abrasion resistant, high solids polyamine cured epoxy mastic coating which may beapplied in high film thickness.
Available with different hardeners for varying substrate temperatures, Standard (Std) and Wintergrade (WG).
This product is a part of a complete system which is certified not to spread flames.
Steel where blast cleaning may not be possible, and on hydrojetted surfaces still being moist where gloss retention is of minor importance.
Suitable for use as a dielectric shield around impressed current cathodic protection (ICCP) anodes onships.
Can be used alone or in combination with various systems of primers and topcoats.
Gives excellent corrosion protection both in salt and fresh water.
If exposed to sunlight chalking may occur.For application in water ballast tanks at new building stage in accordance with PSPC (IMO Res. MSC 82/W), see the "Application procedure for water ballast tanks - Jotamastic 87".
A high quality, alkyd modified chlorinated rubber paint that is specially designed for roadmarking. Very tough and abrasion resistant. Excellent weather durability. Resistant to petrol, diesel, engine oil, water etc. Fast drying. DESIGN USE As a roadmarking paint to draw parking bay lines, arrows, numbers, lines etc. Suitable for use on bituminous and concrete surfaces.
The service life span and the service performance of this product are directly related to the degree of surface preparation. The surface to be overcoated must be dry and free from debris before commencement of coating. Dry brushing should be done to remove dirt and dust. A fresh water wash is recommended. New concrete should be left for at least 21 days to cure before coating. The moisture content of the concrete surface should be checked and ensured to be below 6% when measured with a reliable moisture meter, such as the Sovereign Moisture Meter. SUR.
ZINGA is an unmodified 96% zinc coating that can can be brushed, sprayed or rolled on either as a primer or single coat system for ferrous metals, including rust-damaged and galvanised metal. There is no need to dismantle the equipment and application is easy.
ZINGA is non toxic and environmentally friendly when dry. It can be used under a wide range of temperatures (-40°C to 150°C), touch-dries quickly (a second layer can be applied after only an hour), and humid or damp conditions do not prevent application.
ZINGA is the ideal protection coating for large metal structures where dismantling is not an option, or where the equipment is needed for continuous use.
Can protect longer than hot-dip galvanising (at the same dft)
Can be applied on site
Can be used to re-coat existing galvanising
Existing layers of Zinga can be re-coated
Excellent primer in Duplex system
Good resistance to mechanical abrasion
Can be applied in extreme temperatures
Weldable to X-ray quality
Certified to not spread flame or create smoke (BS476 parts 6&7)
We have gained immense recognition in the industry by providing pristine grade Jotun Anti- Skid Paints. Our offered anti skid paints are processed using high grade chemical compounds and modern methodology in line with industry standards. These anti skid paints are available inextra coarse, coarse, medium and fine particle sizes. Jotun Anti-Skid is aluminum oxide grains, intended to be spread into the last coat in a non-skid system.
Longer life span
Jotun Anti-Skid is aluminum oxide grains, intended to be spread into the last coat in a non-skid system. Available inextra coarse, coarse, medium and fine particle sizes.
For use on decks, floors, gangways and other areas where additional friction properties are required. The spreading is totake place in the wet film during application.
The product must be stored in accordance with national regulations. Storage conditions are to keep the containers in adry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.
With the support of our highly experienced team of experts, we are providing an optimum quality Jotatemp 650 Anti Corrosive Paints. The offered anti corrosive paints are especially suited for preventing corrosion under insulation during construction and shut down/low temperature periods. Our provided anti corrosive paints are processed with advance methodology keeping in mind the standards of quality under the direction of vendor’s experts. These anti corrosive paints are available in different packaging options in order to cater client’s demands.
Long term effects
A high-build, one-component Inert Multipolymeric Matrix coating designed to provide corrosion protection of structures exposed to extreme high and/or extreme low temperatures.
Recommended use Corrosion protection of insulated and none-insulated carbon steel and stainless steel with dry operating surface temperatures that can range from cryogenic to above 650 ºC (intermittent 720 ºC) including cyclic services in temperatures between -185 ºC and 540 ºC. Can be applied on hot substrates (up to 400 ºC - ref. Application Guide).
Especially suited for preventing corrosion under insulation during construction and shut
With sincerity and hard work of our experts, we have carved a niche for ourselves in this domain by offering Futura OS Acrylic Paints which is suitable for a wide range of industrial structures. The offered acrylic paint is processed utilizing best quality chemical compounds and sophisticated technology at vendor’s processing unit. Our provided acrylic paint has a gloss finish with good gloss retention. Also, customers can avail this acrylic paint at nominal prices within a given time frame.
Excellent color retention
Resistance to heat
This is a two component chemically curing aliphatic acrylic polyurethane coating.
It has a gloss finish with good glossretention.
To be used as topcoat in atmospheric environments.Recommended use Marine:
Recommended for topside, deck and superstructure.
Protective: Suitable for a wide range of industrial structures. All surfaces should be clean, dry and free from contamination.
The surface should be assessed and treated inaccordance with ISO 8504.Coated surfaces Clean, dry and undamaged compatible primer.
Please contact your local Jotun office for more information.Other surfaces The coating may be used on other substrates. Please contact your local Jotun office for more information
Hardtop AS is a two-pack polyurethane topcoat with excellent gloss and colour retention. Hardtop AS bases are intermediates and need to be processed before use.Recommended useAs topcoat over an epoxy/epoxy mastic system where a durable, high gloss finish is required inaggressive atmospheric exposure. Cures at low temperatures. The temperature of the substrate should be minimum 0°C and at least 3°C above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is usually required in confined areas toensure proper drying.
Pilot II is an alkyd based topcoat for both exterior and interior use. This product is part of a complete system which iscertified not to spread surface flames. Pilot II bases are intermediates and need to be processed before use. Topcoat in a traditional alkyd system suitable for steel and woodwork. Good weather and colour stability. Good hiding power. The temperature of the substrate should be minimum 3ºC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure correct drying
Pilot Primer is an alkyd based primer with zinc phosphate as active corrosion preventing pigments. This product is certified not to spread surface flames, IMO FTPC Part 5 (IMO Res. A.653(16)) / IMO FTPC Annex2 Item 2.2. As a primer for steel and aluminium structures as part of a suitable alkyd system. Pilot Primer is resistant to dry heat upto 120°C. All surfaces should be clean, dry and free from contamination. The surface should be assessed and treated in accordance with ISO 8504.Bare steel Cleanliness: Blast-cleaning to Sa 2½ (ISO-8501-1:2007). Power tool cleaning to min. St 2 (ISO 8501-1:2007) may be acceptable, subject to exposure conditions.
Flexible paint film that stretches to cover hairline cracks Weather Coat Long life, a premium plus acrylic paint for exterior walls, with its Elastomeric property, ensures that the paint film stretches to cover hairline cracks thus ensuring that walls a look new for longer. The paint is suitable for buildings with hairline crack problems and structures in high rainfall areas where water seepage occurs through hairline cracks.
A specially formulated graphite pigmented bituminous coating designed to prevent corrosion andpitting of 'hot-wet' metal surfaces in Boiler interiors, Evaporators, Tubes, Economisers, Calorifiersand similar other plants operating with hot water and steam above 100o C. The cured coating isinert and highly impervious to hot water. It renders a surface to which deposits do not easily attach,and if attached, can be easily removed thereby simplifying cleaning and descaling operations.